Thus we connect — read only
The value comes fromModbus TCP · Plant PLC · M-Bus (meters)of the installation —read, not controlled. Everything isin-housecalculated, nothing leaves the house. No obligation to disclose operational data.
Your own LLM for CHP — offline
Questions in plain language, answered byYour own installation data— local, no cloud. The AI runs internally; the installation remains yours.
Regulatory framework:NF ISO 8528 (generator sets) · VDMA 3527 (Availability)
Associated causal chains
This component is part ofInstallation causal chains— from cause to effect (gas quality → engine → exhaust gas → heat → efficiency). The AI reads the entire chain, not just the individual value.
Link with the entire installation
A CHP unit is never alone: electricity, heat and gas are linked, and with PV and battery storage, it becomes a system. The AI calculates the entire installation.
Frequently Asked Questions
What does a high number of start-stop cycles mean for the CHP?
High numbers of cycles lead to thermal stress and mechanical wear of components, particularly the spark plugs and the starter motor.
From what point are start-stop cycles considered critical?
In professional practice, more than 3 starts per day are classified as a critical zone, as the load exceeds the standard tolerance for continuous operation.
Why is the size of the buffer tank important for the number of cycles?
A properly sized buffer tank smooths out fluctuations in gas flow and prevents the CHP from having to restart constantly due to short interruptions.
How does gas level regulation influence service life?
Precise regulation ensures a constant operating state; control errors lead to frequent shutdowns and therefore unnecessary start cycles.
Which components suffer most from frequent starts?
Especially the spark plugs due to thermal load, as well as the bearings and the starter due to mechanical load during startup are affected.
How can I determine the Baseline of my CHP regarding the number of cycles?
The analysis is performed via the 2nd start counter (reference value e.g. 6311), in order to quantify the deviation from ideal continuous operation.