Thus we connect — read only
The value comes fromModbus TCP · Plant PLC · M-Bus (meters)of the installation —read, not controlled. Everything isin the housecalculated, nothing leaves the house. No obligation to disclose operational data.
Your own LLM for CHP — offline
Questions in plain language, answered byYour own installation data— local, no cloud. The AI runs internally; the installation remains yours.
Regulatory framework:NF ISO 8528 (generator sets) (CHP Test) · Manufacturer specifications (Maintenance plan)
Associated causal chains
This component is part ofInstallation causal chains— from cause to effect (gas quality → engine → exhaust gas → heat → efficiency). The AI reads the entire chain, not just the individual value.
Link with the entire installation
A CHP unit is never alone: electricity, heat and gas are linked, and with PV and battery storage, it becomes a system. The AI calculates the entire installation.
Frequently asked questions
What is the objective of a baseline measurement for the CHP?
The baseline serves as a reference value for the current state of the engine oil, in order to immediately identify deviations due to wear or incorrect handling.
What oil is used in CHP units?
It must be a specific oil for gas engines, resistant to chemical influences from combustion and high temperatures.
From what point is oil consumption critical?
An oil consumption higher than 0.8 g/kWh is considered a technical indicator of increased wear of the cylinder components.
How often should the CHP engine oil be changed?
The standard replacement interval is approximately 2,000 operating hours, as long as the analysis values remain within the permitted limits.
Why is the oil temperature an important measurement value?
Temperature influences viscosity and therefore lubrication capacity; in the example of a reference installation, this value is stable at 80.3 degrees.
What happens in case of poor oil quality?
Poor quality leads to increased friction, component wear and a reduced lifespan of the CHP engine.