Thus we connect — read only
The value comes fromModbus TCP · Plant PLC · M-Bus (meters)of the installation —read, not controlled. Everything isin the housecalculated, nothing leaves the house. No obligation to disclose operating data.
Your own LLM for CHP — offline
Questions in plain language, answered byYour own installation data— local, no cloud. The AI runs internally; the installation remains yours.
Regulatory framework:IEC 60364 / CEB standards / LV connection by CEB / 4110 (grid connection) · DIN EN 60034 (alternator)
Associated causal chains
This component is part ofInstallation causal chains— from cause to effect (gas quality → engine → exhaust gas → heat → efficiency). The AI reads the entire chain, not just the individual value.
Link with the entire installation
A CHP unit is never alone: electricity, heat and gas are linked, and with PV and battery storage, it becomes a system. The AI calculates the entire installation.
Frequently asked questions
What is the maximum bearing temperature in a CHP unit?
The generator bearing temperature must remain sustainably below 90 °C to avoid material fatigue.
From what point is a high bearing temperature critical?
A significant increase above the individual reference value (e.g., from 31.1 °C) or a rapid increase over a short period signals a fault.
Why does the generator bearing temperature increase?
The causes are generally insufficient lubrication, expired grease or poor shaft alignment (Misalignment).
How does monitoring help with maintenance?
It enables the transition from time-based maintenance intervals to condition-based intervals for the lubrication system.
What does a value above 90 °C mean in practical terms?
This value is considered a critical limit, indicating imminent damage to the bearing or a malfunction of the lubrication.
Why is the baseline measurement important?
Only comparison with the reference value (Baseline) allows for reliable identification of the smallest deviations in the operating status of the CHP unit.