Thus we connect — read only
The value comes fromModbus TCP · Plant PLC · M-Bus (meters)of the installation —read, not controlled. Everything isin the housecalculated, nothing leaves the house. No obligation to disclose operating data.
Your own LLM for CHP — offline
Questions in plain language, answered byYour own installation data— local, no cloud. The AI runs internally; the installation remains yours.
Regulatory framework:VDI 4680 (KWK assessment) · AGFW FW 308 (heating network)
Associated causal chains
This component is part ofInstallation causal chains— from cause to effect (gas quality → engine → exhaust gas → heat → efficiency). The AI reads the entire chain, not just the individual value.
Link with the entire installation
A CHP unit is never alone: electricity, heat and gas are linked, and with PV and battery storage, it becomes a system. The AI calculates the entire installation.
Frequently asked questions
What is the use of condensation for a CHP unit?
This refers to the recovery of latent heat from exhaust gases, which is released when the gas is cooled below the dew point of approximately 57 °C.
Why is the dew point so important for biogas?
The dew point marks the physical limit from which water vapour condenses and latent heat becomes usable, which increases efficiency.
How is thermal efficiency increased by condensation?
Thanks to the additional use of steam, the share of usable heat in the overall efficiency of CHP operation increases.
From when is the use of condensation effective?
Usability begins physically at an exhaust gas temperature below the dew point (approximately 57 °C for biogas).
Why does the exhaust gas temperature drop during condensation?
Energy is released by the phase change of water vapour into liquid water, which causes the gas temperature to drop.
What role does the cooling circuit play in the use of condensation?
The cooling circuit ensures the necessary reduction in exhaust gas temperature below the dew point to enable the condensation process.