Thus we connect — read only
The value comes fromModbus TCP · Plant PLC · M-Bus (meters)of the installation —lu, uncontrolled. Everything isin the housecalculated, nothing leaves the house. No obligation to disclose operational data.
Your own LLM for CHP — offline
Questions in plain language, answered byYour own installation data— local, no cloud. The AI runs internally; the installation remains yours.
Regulatory framework:NF ISO 8528 (generator sets) (CHP Test) · Manufacturer specifications (Maintenance plan)
Associated causal chains
This component is part ofInstallation causal chains— from cause to effect (gas quality → engine → exhaust gas → heat → efficiency). The AI reads the entire chain, not just the individual value.
Link with the entire installation
A CHP is never alone: electricity, heat and gas are linked, and with PV and battery storage, it becomes a system. The AI calculates the entire installation.
Frequently asked questions
What is the main risk in case of knocking in the generator set (CHP)?
Knocking causes uncontrolled pressure peaks that destroy the structure of the piston and the cylinder wall.
How is knocking prevented technically?
Prevention is ensured by precise Lambda control and adjustment of the ignition point based on the current load.
Why is combustion pressure critical for the piston?
The piston must transmit the pressure input to the crankshaft; unstable pressure variations lead to mechanical failure.
At what point does a measured value indicate a fault?
Significant deviations from the baseline (e.g., at 1498 rpm) signal material fatigue or misfires.
What are the consequences of poor Lambda control?
Poor adjustment leads to incomplete combustion or overly hot combustion, which critically increases the piston temperature.
What impact does the ignition point have on service life?
A correctly adjusted ignition point prevents the formation of pressure peaks and protects the piston against thermal overload.