Thus we connect — read only
The value comes fromModbus TCP · Plant PLC · M-Bus (meters)of the installation —read, not controlled. Everything isin the housecalculated, nothing leaves the house. No obligation to disclose operational data.
Your own LLM for CHP — offline
Questions in plain language, answered byYour own installation data— local, no cloud. The AI runs internally; the installation remains yours.
Regulatory framework:DVGW G 260 (gas quality) · DVGW G 262 (biogas injection)
Associated causal chains
This component is part ofInstallation causal chains— from cause to effect (gas quality → engine → exhaust gas → heat → efficiency). The AI reads the entire chain, not just the individual value.
Link with the entire installation
A CHP unit is never alone: electricity, heat and gas are linked, and with PV and battery storage, it becomes a system. The AI calculates the entire installation.
Frequently asked questions
What is the optimal filling level in the gas tank of a CHP unit?
The technically recommended range is between 40 % and 80 %.
At what filling level does the PLC (SPS) start the CHP unit?
The control system generally starts operation at a filling level of around 65 %.
At what value is the gas supply shut off?
To ensure protection against overflow, the shutdown occurs at approximately 30 %.
Why is monitoring the gas tank important?
It protects the system against vacuum and ensures a continuous gas supply.
How is the filling level technically detected?
The value is transmitted to the PLC (SPS) as a real-time measurement via a sensor (e.g., pressure or ultrasound).
What happens if the filling level is too low?
A value below the threshold causes the CHP unit to shut down to avoid damage to the gas supply.