Thus we connect — read only
The value comes fromModbus TCP · Plant PLC · M-Bus (meters)of the plant —read, not controlled. Everything isin the housecalculated, nothing leaves the house. No obligation to disclose operational data.
Your own LLM for CHP — offline
Questions in plain language, answered byYour own installation data— local, no cloud. The AI runs internally; the installation remains yours.
Regulatory framework:TA Luft · environmental impact assessment (EIA) (sections 2910/2921) · DIN EN 15267 (Measurement of emissions)
Associated causal chains
This component is part ofInstallation causal chains— from cause to effect (gas quality → engine → exhaust gas → heat → efficiency). The AI reads the entire chain, not just the individual value.
Link with the entire installation
A CHP unit is never alone: electricity, heat and gas are linked, and with PV and battery storage, it becomes a system. The AI calculates the entire installation.
Frequently asked questions
What is TA Luft for a CHP unit?
TA Luft is the Technical Instruction on Clean Air (Technische Anleitung zur Reinhaltung der Luft), which defines the limits for pollutants such as NOx and dust.
From what point is an authorization according to the BImSchG required?
A formal permit is required from certain total combustion powers; smaller installations can operate under simplified procedures.
What role do nitrogen oxides (NOx) play in the CHP unit?
Nitrogen oxides are the main pollutants whose limits must be strictly observed according to TA Luft to meet environmental requirements.
Why is the temperature after the catalyst important?
The temperature (e.g., reference value 469.3 °C) provides indications on the efficiency of exhaust gas post-treatment and the condition of the catalyst.
From when must measurements be performed?
Measurements are prescribed at regular intervals or during commissioning for installations requiring an authorization under the BImSchG.
What happens in case of exceeding TA Luft limits?
An exceedance can lead to fines, administrative rectification requirements, or the withdrawal of the operating permit.