Thus we connect — read only
The value comes fromModbus TCP · Plant PLC · M-Bus (meters)of the installation —read, not controlled. Everything isin the housecalculated, nothing leaves the house. No obligation to disclose operational data.
Your own LLM for CHP — offline
Questions in plain language, answered byYour own installation data— local, no cloud. The AI runs internally; the installation remains yours.
Regulatory framework:NF ISO 8528 (generator sets) (CHP Test) · Manufacturer specifications (Maintenance plan)
Associated causal chains
This component is part ofInstallation causal chains— from cause to effect (gas quality → engine → exhaust gas → heat → efficiency). The AI reads the entire chain, not just the individual value.
Link with the entire installation
A CHP unit is never alone: electricity, heat and gas are linked, and with PV and battery storage, it becomes a system. The AI calculates the entire installation.
Frequently asked questions
What is the normal oil pressure during hot operation of a CHP unit?
A normal operating pressure is generally between 3,5 and 5,0 bar.
From what value must the oil pressure in the CHP unit be considered critical?
A drop below 2,5 bar is considered an alert value; below 1,5 bar, an automatic emergency shutdown is usually triggered.
Why does the oil pressure drop suddenly during operation?
The causes are generally a massive lack of oil, a clogged oil filter or a mechanically worn oil pump.
How does the oil temperature influence the measured pressure?
Increasing temperatures reduce viscosity; a simultaneous drop in pressure indicates a fault.
From when must the oil filter in the CHP unit be replaced?
The filter must be replaced as soon as the differential pressure increases and the system pressure falls below the limit of 2,5 bar.
Why is monitoring oil pressure important for service life?
Constant pressure prevents damage to the bearings and ensures uniform lubrication of all moving parts.