Thus we connect — read-only
The value comes fromModbus TCP · Plant PLC · M-Bus (meters)of the plant —read, not controlled. Everything isin the housecalculated, nothing leaves the house. No obligation to disclose operational data.
Your own LLM for BHKW — offline
Questions in common language, answered byYour own installation data— local, without cloud. The AI runs internally; the installation remains yours.
Regulatory framework:purchase obligation (OA) / remuneration supplement (CR) 2023 · VDI 4608 (energy assessment)
Associated causal chains
This component is part ofInstallation causal chains— from cause to effect (gas quality → engine → exhaust gas → heat → efficiency). The AI reads the entire chain, not just the individual value.
Link with the entire installation
A BHKW is never alone: electricity, heat and gas are linked, and with PV and battery storage, it becomes a system. The AI calculates the entire installation.
Frequently asked questions
What is the difference between efficiency and overall efficiency?
Electrical efficiency generally only concerns the electrical part, while overall efficiency represents the sum of electricity and usable heat (P_el + P_therm) relative to the energy consumed.
Why is the emergency cooler important for the calculation?
Heat dissipated via the emergency cooler does not count towards overall efficiency; a high emergency cooling power indicates unused thermal capacity.
From what point is BHKW efficiency considered efficient?
For biogas BHKWs, the target value for overall efficiency is typically above 85%, provided that the heat is fully injected into the heating network or used as process heat.
How to correctly calculate overall efficiency?
The formula is: (P_elektrisch + P_thermisch) / P_gasenergie. Only the heat actually extracted must be included in the sum.
Why does efficiency decrease at high load?
A drop in overall efficiency with an increase in load often indicates that the heat production can no longer be fully extracted and that emergency cooling is activated.
What does a Baseline mean for a BHKW?
The Baseline is the reference value of the efficiency under standard conditions, against which the actual values of the installation are compared for fault diagnosis and efficiency monitoring.